See: http://www.nwa.com/corpinfo/aword/ Bela P. Havasreti

Mike: If you're going to do the side panels, seriously consider what's between the side panels and the aluminum. If it's anything like my cherokee, it's disintegrating roofing insulation (or something that looks like it). You'll want to remove that stuff too and put better insulation. I'm leaning...

Am I hallucinating again, or did I read somewhere that you can have Lightspeed install a new cord on their headsets so they will take power from a panel mounted jack, rather than the in-cord battery box? I can't find relevant info on their website... -jav

I've been flying my 182 for the last 19 years and it's become just "transportation" and not "fun" anymore. So I'm thinking of buying an "airknocker" to fly for fun . Do any of you guys out there that have Aeronca experience have any tips or suggestions on what to look for in a pre-purchase for...

What is the accuracy of the average EGT gauge? Is it plus-or-minus 50 degrees or so? Is it possible to have them calibrated? If so, is it worth it to have it done periodically? It seems that alot is at stake if the gauges are not acurate. My PA-28R-201T POH says that temperatures of 1650...

I've been out looking at the early Debonairs with the IO-470-J or -K in them. The books I've looked at and the info in TAP say they cruise at 148 knots (I'm assuming at 75% power), and I was wondering if there was anyone out there who had any "real" numbers on cruise speeds. Thanks! Chris

I'm asking everyone in the group to please take the time to visit the FAA site and post a comment or two on the proposed National Air Tour Safety Standards Public Meeting. I was just there and disappointed in the lack of comments. http://www1.faa.gov/avr/arm/rulemakingforum.cfm?nav=part -- Jim...

And it's not even for the Dept. of Defense! :-) For those of you thinking about airplane ownership (and I know you're lurking out there!), we just got the bill to replace one of the two dimmer switches (and a few light bulbs) in our Pathfinder's panel. $104 in parts, 5 hours labor (It's a real...

Icom makes a little gizmo to allow you to plug a handheld into an existing antenna from a panel-mount radio. Does anybody know what the part number for this is? I've searched the Icom web site and can't find any mention of it, but my avionics guy says it exists. Does anybody have a part...

I expect this question has been asked many times here....but here goes. Exactly what, if anything, do I need if I want to fly into Canada? Does the answer change if I want to land in Canada or if I am just flying through their airspace? I expect to be on an IFR flight plan, so I will already have...

1, Working Cessna NAV/COM ARC 300 or Replacement For 1976 150M Wanted Cheap (I think It Is 14V system) Will only be used temporarily untill i can drop a gps/com in it. 2, 2 Place Intercom Wanted Cheap Battery Or Panel Mount Please E-mail me at or call 360-521-8452 if you have...

I've been flying my 182 for the last 19 years and it's become just "transportation" and not "fun" anymore. So I'm thinking of buying an "airknocker" to fly for fun . Do any of you guys out there that have Aeronca experience have any tips or suggestions on what to look for in a pre-purchase for...

Anyone have a pinout diagram for a King KR-21 marker beacon receiver? Thanks in advance. Jim

I HAVE INSTALLED THE FOLLOWING IN MY 1975 ARROW. GARMIN 430, GARMIN 340, GARMIN 327 TRANS AND GDL FOR WEATHER DATALINK. I AM REMOVING MY ADF, DME,. AM I THROWING TO MUCH AWAY ON THIS ARROW? IT HAS 4400 TOTAL TIME *** Sent via http://www.automationtools.com *** Add a newsgroup interface to your...

1971 Cessna 150 6200 TT 935 SMOH, 4200 TT on engine Good paint & interior Extras: EGT, panel-mounted Garmin Pilot III New Narco NAV/COM and transponder in '98 No damage history (I checked) All logs except for first two years. I saw the plane today and everything looks good. Was not able to fly

See : http://www.airliners.net/open.file/534019/L/

Just returned from the annual Inspection Authorization renewal meeting. Not too boring and some good information and good food. The one thing that got the most attention was the assertion by one of the FAA inspectors that when you remove any equipment installed with a Form 337 as a major...

Cherokee National Fly-In & Convention June 18 - 20, 2004 Open to all PA-28 & PA-32 Cherokee pilots, their families, and friends. At the renowned Tan-Tar-A Resort on the Lake of the Ozarks, Osage Beach, Missouri. Grand Glaize airport (K15). Our 2003 Fly-In was a huge success. Our 2004 Fly-In...

Cleveland 500 X 5 brand new, temporary tires have been mounted on the rims, have a set of new (can't remember the name - will check tomorrow) tires as well, complete with hub caps. These are the high performance Cleveland number 199-152. Wicks & Spruce list 'em for $750, I'll take $600 USD - you...

Need a firewall for a PA 38 Tomahawk. Anyone have any sources for parts? Thanks Hamish Ross