|
|
Help needed understanding turbojets by
Hul Tytus
rec.aviation.homebuilt
Help needed understanding turbojets
Horsepower is defined/measured as 550 foot pounds per second. ie,
lifting 1 pound 550 feet every second is 1 hp. If you lift 550 pounds one foot
every second and keep that going for 12 hours or so every day, you are a
horse....
|
|
2 |
540 |
|
|
Help needed understanding turbojets by
Hul Tytus
rec.aviation.homebuilt
Help needed understanding turbojets
Horsepower is defined/measured as 550 foot pounds per second. ie,
lifting 1 pound 550 feet every second is 1 hp. If you lift 550 pounds one foot
every second and keep that going for 12 hours or so every day, you are a
horse....
|
|
2 |
623 |
|
|
fiberfrax..which way is up? by
[email protected]
I'm getting ready to lay down fiberfrax in the cowling. One side is
smooth...the other has a "pebble" type texture. Which side should
face the engine...ie. which side would deal with fire the best?
|
|
2 |
467 |
|
|
Help needed understanding turbojets and airplanes by
es330td
Nicolas Charmont equipped a Cri-Cri homebuilt with two AMT Olympus
turbojets each producing 51 lbf of thrust that were originally
designed for model airplanes and it flies at 130 mph. I have since
read about another company, FTT (www.fttinc.com) that has an engine
for UAV's producing 37 lbf of...
|
|
8 |
1,227 |
|
|
Oxy/Act welding setup safety by
canuck_bob
I am adding two regulators to my welding system for welding aircraft
parts with a little Smith Airline torch system.
I was able to but two excellent new Craftsman acetalene regulator ver
y cheaply.
I am going to add these regulators to my little portable welding table
and rig my hoses from the...
|
|
7 |
971 |
|
|
small o/a torch preferences? by
patrick[_2_]
Hello; I'm considering a project - homebuilt recumbent bike- that I'm
going to use as an excuse to buy a smaller o/a torch. I currently have
a victor torch, model 100-with the valves at the bottom of the largish
body and would like to buy one of the smaller torches with the valves
at the top of the...
|
|
6 |
728 |
|
|
HVX MODS on VW engines by
Veeduber[_2_]
To All:
Oil for the right-hand half of the crankcase arrives there via the
channel behind the #2 cam bearing. When building a high-reliability
engine a standard procedure is to increase the cross-sectional area of
that narrow channel.
While this improves things, the amount of oil that can reach...
|
|
0 |
833 |
|
|
electric/electronic tach by
sky bob[_2_]
The project that I purchased (Long EZ) came with a electric tach and a
sender/sensor that attaches to the tach drive on the rear of the
engine. It is made by a Co. called Carr. I have been looking for the
manufacture on the web as I am in need of a different sender/sensor.
wondering if anyone has...
|
|
1 |
560 |
|
|
stacking coins by
wright1902glider
Finished up my kinetic sculpture at 6:30 AM last Saturday morning.
Made it to the race by 8:30. (Photos available at:
http://www.kineticists.org/Community/tabid/56/forumid/1/threadid/278/scope/posts/Default.aspx)
Sound familiar? Good news though. By the end of the project I was
making fairly...
|
June 18th 09 06:45 AM
by Bob
|
1 |
527 |
|
|
Pics of Clipped Cub with shortened fuselage by
canuck_bob
In some writeups there is a reference to some Clipped Cubs with
shortened fuselages. They are high performance Cubs with solo seats
usually refered to.
Anyone know of any pics on the web?
|
|
0 |
565 |
|
|
GY-20 Minicab group by
Michael[_6_]
G'day,
Once upon a time, not so long ago, there was a Yahoo group called
"GY-20_Minicab-builders".
This group seems to have vanished from the face of the internet - does
anyone know what happened? The last time I accessed it was the 31st of
January so it's only been deleted in the last...
|
|
6 |
1,406 |
|
|
Homebuilt robotow? by
Guppy Pilot
Hey all. I'm looking to surprise the wife with a motorized tow for
our C210. Robotow makes a really interesting thing that's powered by
a cordless drill.. It's a thousand bucks. Was really hoping to
create something more affordable. Anybody got an ideas or plans for
something...
|
|
8 |
3,351 |
|
|
Jackson Hole Airport by
stol
I know alot of you guys and gals are pilots and we need your help.
The National Park Service is soliciting comments regarding this and
everyone is welcome to post their comments with the NPS. The only
thing required in the comment is to support the lease extension or
not. To date some radical...
|
|
6 |
1,295 |
|
|
Beginnings of a new homebuilt aviation website by
Lenard Spencer
I have started work on a new website called www.homebuilt-hangar.com.
It is intended to be a place to share ideas with other homebuilders.
The main page is still under construction, but I have a preliminary set
of forums up and running.
http://www.homebuilt-hangar.com
|
|
1 |
719 |
|
|
Sending units by
sky bob[_2_]
I have two new oil pressure sending units that came with the project
that I purchased. They look identical other than one has a single post
on top W/nut and the other has two posts. There is no instructions in
the boxes and the VDO gage is already installed . Is one better that
the other? Any...
|
|
1 |
691 |
|
|
Measuring the effectiveness of a sandblaster? by
Michael Horowitz
I know the compressor requirements are stated when considering a
sandblaster, but is there anyway to measure the effectiveness e.g. is
my blaster taking off paint as quickly as someone elses?
As an example, I can take off an 1/8" strip of paint at about
1"/second, but have no idea what should be...
( 1 2)
|
|
17 |
1,427 |
|
|
The Home-made Home-builders Engine by
Veeduber[_2_]
To All:
For those of us who own a lathe and milling machine, somewhere in our
past there is probably a tiny steam engine. Indeed, there's probably
more than than one. A company in England provides the basic castings
as a kit. As the machinist, you are expected to provide all else,
from the...
( 1 2 3 ... Last Page)
|
|
37 |
2,872 |
|
|
Paint touchup on Magnesium by
Roger (K8RI)
I need to do some touch up on Magnesium with a few bare spots.
What's a good prep and primer for said areas?
|
|
2 |
445 |
|
|
Gage & sender by
sky bob[_2_]
I have a new never used UMA 2 1/4" suction gage Mod # 3-102-12 for
sale also a new in the box Westach fuel pressure send Mod #387-13st W/
instructions and wiring for sale. If interested please contact me off
group.
|
|
1 |
912 |
|
|
Alt. question by
sky bob
I am building a Long EZ and am the stage where I am ready to start the
engine installation and have a couple questions for the group. The
Alt. that I have is a small single wire 60 amp alt W/ a built in
regulator that I will be putting on a Lyc. 0-235 my quastions are as
follows. 1. Is there a way...
|
|
9 |
728 |