Hi! Someone in the Netherlands offers this tube frame aircraft fuselage: http://www.marktplaats.nl/foto.php3?g=verzamel&u=luchtvaart&ID=17209 I have no idea what it; the seller neither apparently. Can anyone ID it? Thanks!

From: Sam Goldwasser Date: 1/8/2005 18:01 Central Standard Time Message-id: CJT writes: wrote: cable lacing... a lost art. Is there anything that a laced cable-bundle does...

I recently did a flight test of my Lancair 235 testing TAS, true air speed, vs. the reflex angle of the flaps, i.e. angle of the flaps above the wing surface. The test was flown at 1535 lb, 11,000' density altitude, full-throttle, leaned for max rpm. +8 deg. - 196.2mph; +6 deg. - 199.7mph; +4 deg....

If you would like to have the finest low-loss, light-weight coax cable for your aircraft radio installations, get Andrew FSJ1-50A Heliax Superflexible Foam Cable. It's pricier than the RG's, but the performance is so far superior that your com, VOR, Xpndr, and whatever will give you range...

what is a fender washer? in which situation is it used?

If you are looking for a simple, inexpensive, somewhat easy to make light-flasher for your landing lights, check this out: geocities.com/eaa170/techc/AircraftLightFlasher.pdf .

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am now mounting my instruments & am wondering what hardware to use to mount them. Also, to these standard, round instruments such as an artificial horizon need any additional supports behind the dash? Next question would be, when it comes time to do...

Hi all, Does anyone know who's shop is involved in the new Discovery Channel show Wing Nuts? Dave

KR-2 For Sale on eBay Item number: 4518843845 -- -- Have a good day and stay out of the trees! See ya on Sport Aircraft group http://groups.yahoo.com/group/Sport_Aircraft/

I was looking for a hideable antenna for a rag and tube homebuilt, I emailed RST to see if they had a kit for one but seems it isn't possible? Anyone out there had any success? I guess I've seen those angular ones that get stuffed in wingtips and I will have thin plywood and dacron covering or...

Corky Any web address for more info, for the curious! John Corky Scott wrote: Paul Lipps, an aerospace engineer, has developed a new prop for experimentals. He's taken a new look at a lot of issues with props and has come up with something that looks really strange, but works

Hi all, We have updated our four channel lighting controller with an enclosed version in an anodized, brushed aluminum chassis. It is available from us and will also be available from Van's along with our original controller. Rich See: http://www.fdatasystems.com

Chris, Sorry about your luck...sounds like you had the right idea. I can't help on most of this but I do have considerable experience with oil coolers...I designed several of the units from Niagara and Aero Classics. First I would check the oil cooler...If it is an overhaul from Pacific oil cooler...

Anyone out there using the Garmin 96c handheld GPS? I have discovered a glitch that may be a significant firmware problem on the 96c (and maybe the 96). When projecting a waypoint on a bearing from between 165 to 181 degrees FROM any existing waypoint in the 96c's internal aviation datatbase on...

I've started a new aircraft homebuilding forum at http://www.WingsForum.com "They" say that a picture is worth a thousand words. The ability to attach spreadsheets, documents, and CAD files can speak volumes. I am not asking anyone to leave this list. I'm just offering an additional resource...

Hi NG, in an old publication I found a design that appeared worthwhile looking at. Its name is "Culex", it is a all-wooden, fixed gear, tandem seat light twin using (back then) Limbach engines. The information about had been published by the "original" Fisher Flying Products. Since then, Fisher...

I understand they are going through an ownership change; does anybody know exactly what's going on? They do not answer emails. I haven't tried calling, but as someone who's considering a KIS Cruiser and will be making a kit choice pretty soon, what I'm seeing so far from the factory is not...

Anyone out there building a Rebel or Maverick??? --

Hi group, can someone please tell me whether efforts are on the way already to turn the Smart CDI diesel engine into an aircraft engine? I'm looking for something (preferably a diesel) in the 80HP range. Maximum weight should be appr. 75 Kg (165 lb). It looks to me the larger of the Smart CDI's...

To All: Shortly after departing SDO enroute to LAX a laser briefly illuminated the cockpit of a three-holer causing the First Officer to become so disoriented that he accidentally woke up the Captain. Boy, did he get yelled at. -R.S.Hoover