|
|
Fabric -- Polyfiber vs Air-Tech Coatings by
Tom
I've finally finished building my shop and in two weeks will drag my Maule
home to refinish. I'm now leaning towards Air-Tech vs Polyfiber. I know
Polyfiber is very forgiving in the early steps and easy to use but I've
heard that the ease of spraying Aerothane has been an issue with some. I
want...
|
September 2nd 03 02:41 AM
by Tom
|
0 |
719 |
|
|
Narco DME 890 question by
Wayne
Anyone have one of these? Mine was inop when I got the plane and I now
have it operating (well, at least lighting up) and don't have an operators
manual. I tuned in the ILS freq and don't get any distance. If I pull the
knob, I get an "RMT error". I have not been in the air yet with the unit,...
|
|
2 |
1,215 |
|
|
XMRadio Satellite Weather Has Arrived by
Richard Kaplan
I have had the opportunity to test out the new XMRadio Satellite
Weather system (www.wxworx.com) enroute to Oshkosh... The unit is a
demo unit which has been somewhat delayed from the initial planned
production date of July 1 -- I am planning a Forums talk Wednesday
7/30 at Oshkosh on portable...
( 1 2 3 ... Last Page)
|
September 2nd 03 02:51 PM
by Newps
|
37 |
3,686 |
|
|
Sticking Starter by
Wayne
The starter on my O-360 is not releasing when I let go of the starter
button. If I rev the engine slightly, it disengages at about 1500 RPM's. I
have sprayed silicone spray on the ring gear, and well as the bendix of the
starter but have only started it once since and it still stuck. Is...
|
|
5 |
1,247 |
|
|
PC connection for GPS 90 wanted by
Jim Weir
Send me a self-addressed stamped box (the Post Office small video box is
perfect) and I'll loan you mine for a week or so.
You can also get the Garmin connector (cheap) from pfranc.com. Then buy
yourself a DB connector from Rat Shack and you've got one for yourself. The
whole thing together...
|
|
4 |
820 |
|
|
This is why we do runups by
Roger Long
The particular O-320 in our 172N is the sweetest running aircraft engine I
have ever known. We maintain it rigorously and proactively and lean
aggressively for all ground operations. I have not had to clear a mag once
in the 880 hours since it was installed.
I flew the plane the day before...
( 1 2 3)
|
|
25 |
1,227 |
|
|
Flyins? Dallas Area by
Dave
Is there a list of flyins for the Dallas area somewhere on the web?
Thanks
Dave
|
September 2nd 03 11:03 PM
by No Spam
|
1 |
517 |
|
|
Airshows and Aviation Employment pages. by
Dick Enna
Most interested at this time in learning about all the Small Aircraft
and Large Air Shows scheduled for this summer....can you help me as to
where they can be found, etc etc
.....thank you in advance and,
Best regards,
Dick Enna
*** Sent via http://www.automationtools.com ***
Add a newsgroup...
|
|
0 |
1,389 |
|
|
KX155 Pinouts by
Richard Kelly
Does anyone have the pinouts for a KX155 please
Thanks in anticipation
Ric
|
|
1 |
2,207 |
|
|
Database update for Foster LRN-500 loran? by
Ray Andraka
Anyone know if I can get a database update for a Foster500
Loran, and if so where from and how much it costs? I
wouldn't bother except my autopilot is connected to it, and
the existing database is old enough that some of the airport
ID's have changed for ICAO, and one or two VORs have...
|
|
4 |
2,657 |
|
|
A few questions for a new (hopefully) ower by
Ray Andraka
I have a 1965 Cherokee Six that had the original gyros and scatter shot layout
as well as fuses when I bought it. I used the existing holes but rearranged the
instruments into a T panel when I replaced the gyros with modern units. The
additional cost for moving the other instruments was small...
( 1 2)
|
|
12 |
854 |
|
|
It's over was: RI tax madness by
Roger Long
RI appears to be back pedaling fast. The state sent a letter to AOPA today
saying that it was clumsy wording and the provision was never intended to
apply to residents of other states.
It was intended to "help" state residents by letting them buy an airplane
that the kept and used out of state...
( 1 2)
|
|
18 |
908 |
|
|
Differences in models of Foster500 loran by
Ray Andraka
Can anyone enlighten me as to the differences in the Foster
LRN500 based on the part number. So far I have found
P/N 805D0630-01
P/N 805D0630-11
P/N 805D0630-21
P/N 805D0630-31
mine is a -01, s/n 614. It does not have the mid-continent
Loran chain, but does have outputs for remote...
|
|
1 |
1,321 |
|
|
|
|
1 |
362 |
|
|
IFR - VFR Static and Transponder Inspections (dallas, tx) by
Dave
To all,
I am now performing Static and Transponder systems inspections
(91.411-413) in the Dallas area.
Either at your location or mine (F69 Dallas Airpark).
These inspections are required every 24 months.
Please feel free to email me for more information.
Cheers
|
|
3 |
989 |
|
|
The Great Static Wick Fraud by
Craig Prouse
The story you are about to read (perhaps) actually happened. It just seemed
so trivial in respect to other things going on in my life that I have
previously neglected to report that:
In preparation for an extended trip to the great Pacific Northwest, I felt
it prudent to take an IPC. You just...
|
|
3 |
987 |
|
|
Any retired Apollo 800 Flybuddy Lorans? by
Roger Long
We still have one of these and it works great in the simple airspace we fly
in. Also good backup for the handheld GPS. The database is very old
however. Does anyone out there have one of these that they have retired?
I'd like to get a more recent database card?
--
Roger Long
( 1 2)
|
|
12 |
1,697 |
|
|
Transponder Problem by
Jay Honeck
The third digit on my formerly bullet-proof Narco AT-50 transponder has
suddenly started displaying incorrectly for ATC. Specifically, it seems to
be showing as a "4" on their screens, regardless of what we dial it to in
the plane. Thus, instead of squawking "1200" when we're VFR, we're
squawking...
( 1 2 3)
|
|
22 |
897 |
|
|
Shop Labor Rates (here and there) by
Craig Prouse
In the SF Bay Area, I've become desensitized to shop labor rates in the
range of $90/hr. Plus or minus $5, this seems to be the going rate at PAO,
SQL, RHV, or SJC. That's after you finally get your plane in the shop,
which can take a day or two or seven.
I recently had a very favorable...
( 1 2)
|
|
15 |
1,436 |
|
|
Question on Bush STOL kit by
MikeM
I have the Horton kit on my 182L. I like it
Mike M
e-mail at m l a d e j o v @ c e d . u t a h . e d u
Richard Jimenez wrote:
I am designing a modification kit that further enhances both the stall speed
and the high speed, of the type of STOL kits that add a cuff to the leading
edge of...
|
September 7th 03 03:54 AM
by MikeM
|
0 |
1,391 |