|
|
Looking for out of service main rotor blades for testing new rotor by
Wright1902Glider
Have you tried contacting one of the commercial companies like Petroleum
Helicopters or Air Logistics? Both of them are located in (or near) Lafayette,
LA. If the blades from a Bell 206 would be of use to you, they might be able
to help. Otherwise, you might also try Barnstormers.com...
|
|
9 |
2,662 |
|
|
FS: Velocity 173 FG Elite by
Ezaviator
FOR SALE - 1997 Lindy Craftersmanship Award Winner at Oshkosh. Fixed gear long wing Velocity Elite (gull wing doors) IFR with dual KS 155's, Navaid autopilot, Apollo 360 moving map GPS, nav and GPS coupled to autopilot, audio panel, etc. 556 TTSN Lycoming IO-360-C1D6 200 HP, Performance Prop...
|
|
3 |
2,661 |
|
|
Harley powered airplane by
Brett
I built a Zenith 601 XL with a Harley motor. It took about 7 months to
build alot of that time figuring out the motor stuff. Then 3 mo.
waiting for the inspection. Well I just got my inspection done on the
9th and I took it up. WOW what a rush. You can see it at
www.hog-air.com
( 1 2 3)
|
|
22 |
2,661 |
|
|
Vacuum Gyro Question by
Jim Carriere
This is one of those questions where there must be a simple answer.
This is probably the forum to get the best explanation.
Why aren't vacuum driven gyro instruments driven by pressure instead?
The reason I'm wondering is because about 2" of suction is
sufficient to power a turn needle, and while...
( 1 2)
|
|
15 |
2,660 |
|
|
|
|
0 |
2,658 |
|
|
Good prices on Aeroshell oils at Sams club by
Fastglasair
Do you guys know that you can purchase Aeroshell 15W50 and W100 or W80 at some
Sams club locations. If yours does not stock, I was able to get mine in
Ogden,UT to do so. I ordered 20 cases, this primed the pump to get them to
stock and I spread the word to others to keep the demand up to keep it...
|
|
4 |
2,654 |
|
|
Gluing rubber pieces by
[email protected]
Trying to repair the foot on the extension laddder I use
in the hangar.
It needs a new rubber foot.
I'm riviting a 1/4" piece or rubber to the aluminum foot.
Then I want to glue a 1/8" piece to the that to cover the
rivet heads.
So the glue joint would mostly be in compression and would
( 1 2)
|
|
16 |
2,654 |
|
|
The effects of Ethanol on... by
ventus2
Not wanting to restart the previous discussion on how ethanol is made and
how much is in which fuel, available where, the question I am interested in
is; does anyone know what effects ethanol will have on:
tanks - metal / composite
fuel systems - tubing/electric pumps/carbys
Engine - serviceability...
( 1 2 3 ... Last Page)
|
May 8th 06 05:45 AM
by Roger
|
35 |
2,647 |
|
|
bettsometer fabric tester by
DavidH
Greetings group
does anyone have experience with the Bettsometer fabric tester,
\how to use it
how to interpret it results etc?
many thanks
David Hill
|
December 12th 05 11:34 AM
by Chris
|
2 |
2,647 |
|
|
Jabiru 80 HP Experience, Anyone? by
Orval Fairbairn[_2_]
A group of us are building a Pulsar and expect to license it in exp-LSA
and are seriously considering the 80 horse Jabiru as a powerplant. The
engine, and FWF kit are less than the Rotax, without having a gearbox to
complicate things.
Who out there has experience with this...
|
|
4 |
2,645 |
|
|
Wow! New fractional aircraft share re-sale options by
Darrel Toepfer
Crossposts to: aus.aviation,alt.fan.don-imus,rec.travel.air,rec.aviation
Deleted.
"Chris Grant" wrote...
Hi,
Just stumbled upon: http://www.JetRe.com
This is the best marketplace for buying and selling pre-owned
aircraft shares. Don't want to sell your share...
|
|
0 |
2,645 |
|
|
Battery cable selection by
[email protected]
I am putting two 12V batteries together
http://www.batterymart.com/p-hawker-sbs-J16-aircraft-battery.html
to make a 24V battery.
What size cable should I use to make the serial connection?
http://shop.genuinedealz.com/Marine%20Grade%20Wire/Marine%20Battery%20Cable/
Thanks,
Karl
( 1 2 3)
|
|
22 |
2,645 |
|
|
|
|
15 |
2,642 |
|
|
Recommendation for Radio, transponder and Altimeter by
Ron Natalie
"Thomas" wrote in message ...
the radio an older King works
fine but it has hard time receiving calls from radar center... it
sounded garbled.... I don't know if it just have weak receiving or bad
antenna placement...
|
|
0 |
2,640 |
|
|
Pinout for TERRA TRT-250 transponder by
Turaga
Pinout for the 25-pin connector on my TERRA TRT-250 analog switch button transponder.
and
I have the referencemanual for the King KT76 - 78 (a) if someone have questions...
Tor Rene
Norway
Got my pin-diagram from Juan Jimenez today, THANX
( 1 2)
|
|
10 |
2,639 |
|
|
Looking for TSO Altimeter by
Rob Turk
Anyone here who has a spare TSO'd altimeter floating around? I'm looking for
an 80mm (3 1/8") model with range 0-20.000ft and millibar pressure scale,
maybe a Winter or United Instruments??
Thanks!
Rob Turk
The Netherlands
|
|
0 |
2,634 |
|
|
Homebuilt Airplane Crash by
Harry O
This was in the newspaper today. No information on the airplane, but it was
supposed to be a homebuilt. I have heard it was a BD-4, but no
confirmation. I used to fly out of the North Omaha Airport. It is
relatively short (2,500 feet from memory) with high trees off the south end.
The north end...
|
November 15th 04 03:40 AM
by Morgans
|
1 |
2,634 |
|
|
Jim Weir or other qualified persons: a tangent on the 2 radio 1 antennathread by
Dave S
Something about the thread, regarding transmitting power from one radio
being funnelled into the other radio made me take pause. In the Houston
area (and I'm sure most other major cities) there is an antenna farm
that has a collection of FM, AM and TV broadcast antennae. I would
estimate there are...
( 1 2)
|
|
12 |
2,631 |
|
|
home built sites in Australia? by
Chris Sinfield
new to this site..
are there any home built aircraft news groups in Australia? I have looked at
the SAAA and Ultalight federation pages. I am thinking of building kit plane
Down Under.I am a pilot as well as a Airframe Eng mech.
Chris.
|
July 18th 03 04:05 PM
by CW9371
|
1 |
2,631 |
|
|
WANTED: T40A Plans by
Marty Hammersmith
Looking to buy a set of plans for the all wood Turner T40A or the T40A
Super. The website listed in Kitplanes is dead and I called the number and
left a message on the machine identifying them as the Turners but no return
phone call. Anyone have a set they've been wanting to get rid of?
|
|
3 |
2,630 |