Subject: Aircraft Spruce's attitude Abuse I went to Arlington Washington fly in, Saturday July 12, the*re I purchased from Aircraft Spruce and specialty a handheld ICOM A-22 and *ordered an Airmap GPS . I took the A-22 with me (and paid for it with c*heck)and was told that they will ship the...

I checked out a fuel tank transmitter the other day. Under an inspection panel, a single screw terminal connects a wire to the guage from a rheostat hooked to a float. I clipped a test lead on the transmitter terminal, and grounded the other end. The gauge read FULL (as it should) So the...

In the latest Air & Space magazine is a surprisingly technical article on the spar problems on the T-34 Mentors. It shows how Mentor wings (and I presume Bonanza and many other Beech wings) are assembled. Instead of being riveted completely together they are in three main pieces. (1) A main...

We are looking for 2-3 UPCO S-III-S ejection seats in flightworthy condition or (at the most) in need of refurbishment Thanks, Rafi Yoeli www.urbanaero.com

Okay, so I've been "volunteered" to be on the board of directors of the biggest fly-in event in Iowa City's history, the Eastern Iowa Big Kids Toy Show, scheduled for May 20 - 21, 2006. See us at www.BigKidToyShow.com (Yes, they made me wear a -- *sob* -- TIE for the photos... It was awful! ...

Cut a piece of welding rod of the required length Flatten one end with your favorite ball peen. Drill a small hole big enough for whatever you want to thread. Put a point on the other end. Cut and bend to your heart's content. Larry Smith wrote:

I'm in the midst of working on my transponder install. I've got three antenna cables running to the radio/transponder panel. Two are for the Narco Nav/Comm and attach via BNC, the other used to be soldered to the rack for the old transponder but will now get a BNC fitting as well. Accidentally...

http://www.sacskyranch.com/faq_continental/FAQ00003.htm Sacramento Sky Ranch has other excellent reading material too, especially on aircraft engines.

So now I'm thinking... How do I measure the Horsepower of my Sonerai's 1835cc VW motor? Or do I just make a couple of assumptions? Prop 52" dia. 42" pitch motor can turn it 3000rpm static at WOT and a ground elevation of 5000 feet and temperature of 31 degrees Celsius or 87.8 degrees F. Assuming...

Bringing viewers compelling, real-world stories of heroism, military strategy, technological breakthroughs and turning points in history, Discovery Communications, Inc. will transition its Discovery Wings Channel to the Military Channel on Monday, Jan. 10,...

I'll try again, Any suggestions on how to remove a good dose of waterproofing (non silicon) from a fiberglass and resin (vinyl Ester) lay-up? Can it be done safely and with no lasting, or long term aftereffects? This is inside the horizontal stab where strength is pretty important. I'm to the...

I have a finished CF sample, a common single-ply weave, that exhibits extreme stiffness, 'thin-ness' and is very lightweight, it looks dry. I have molded a part using a similar weave, single ply, and do not get the same stiffness. I can easily deform the finished part with a press of the thumb. I...

Hello All -- You are invited to drop by Zeno's Warbird Video Drive-In (www.zenoswarbirdvideos.com) and catch our End of Summer September Triple Feature of World War II aviation films for free online video viewing. * This month "At the Matinee," we're featuring the return of an all...

Start with this: How many people do you know who own a $45,000 SUV? Light Sport Aircraft are not intended for people who are already pilots. The whole purpose of the Light Sport Certificate is to draw new people, along with new money, into the sport side of aviation. Consider someone who has...

The recent thread about lathes and related machinery leaves me at a loss with the terminology, me not being a native English speaker. A) I think I can imagine a lathe, if I understand correctly it is called a "tour" in French and a "draaibank" in my native Dutch. That means, the piece of stock...

Quick question for the group. When setting the torque on prop bolts (I have bolts with nuts), if the hole for the cotter pin doesn't line up with the castleated nut at the proper torque setting, is it better to go tighter or looser to get the hole lined up. My gut instinct says tighter,...

I got an eMail from Verizon this morning saying that they are dropping their news server. I'm not going to pay for a subscription to a newsgroup service for 2 groups so my question to the group is: what eMail list would you recommend to replace this group? I'm already on the Chuggers list but...

I am fairly new to the world of the Ultralight, and I am hoping to look at some plans before I start buying them, just to have an idea of what I am doing, tools necessary and misc. If there is anybody that knows where I might be able to acquire some plans it would be greatly appreciated. Thank...

Can someone please provide me with pinout information for an old 360 Channel King KX 170 NAV/COM? This in not the KX 170A or KX 170B version.

Anybody have the pinouts for a Bendix Ignition Exciter, p/n 10-378340-1? Three pins, A, B, C. I think it's A= Ground, B=DC 7-30v, C=not connected. Also, does anyone know who can make me a custom harness for this unit? -- Get rid of SPAM like I did! http://spamarrest.com/affl?413905