View Single Post
  #5  
Old November 18th 19, 03:39 AM posted to rec.aviation.soaring
Scott Williams[_2_]
external usenet poster
 
Posts: 83
Default How did you install your FLARM brick and/or ADS-B Out?

On Sunday, November 17, 2019 at 12:17:18 PM UTC-6, wrote:
Is it powered direct or by another instrument?
Did you install a dedicated fuse?

trig TT22 powered by a dedicated fused circuit
Did you install a dedicated off/on switch or is it slaved?

Master switch supplies power to trig TT22 dedicated circuit
Do you use a dedicated GPS antennae or split with another instrument.

Ta70 (actually a Rami AV 801)powered by TN70 WAAS GPS receiver
TN 70 powered by TT22
Do you ever have the in-flight need to turn it off?

If I'm in the glider, on the ground or in the air, It's on.
If you have both, why would you fly with one on and not the other?

No flarm. And I have yet to determine if I will ever need it,
I fly in western Oklahoma and only 1 other glider even has Flarm
In my area.
If necessary, how is the Trig -2X and the TN-72 software updated?

I have pulled seven or so ads-b reports and they all have been perfect.
I am hoping the Oudie will include a non flarm Ads-b In function the
future.

Cheers and good lift,
Scott