At 13:28 06 February 2020, Martin Gregorie wrote:
On Thu, 06 Feb 2020 11:38:38 +0000, Tim Newport-Peace wrote:

I had in mind sleving the Belling Lee with Heatshrink and the internal
glue will seal to the outer of the co-ax eat each end. That should be
moisture-proof. I would Never suggest splicing co-ax.

Ah Ha! A simple fix that never occurred to me.
Sticky heat-shrink ordered.
Thanks.

--
Martin | martin at
Gregorie | gregorie dot org

Don't be in too much of a hurry. Let the warmer weather(?) dry out any
moisture present or you will just be sealing the moisture in ;¬)

Tim Newport-Peace
http://www.newportpeace.co.uk/icom.htm