Battery switching without tears
I used Shottky diodes plus power resistors plus capacitors. I'm no EE but I took enough circuits courses to handle this problem. The Shottky diodes keep the batteries from cross-discharging each other, the capacitors keep the instruments powered when the switch is disconnected from battery 1 and before it is connected to battery 2 and the resistors keep the capacitors from drawing too much current when you power them up since they make the circuit (even with the diodes) look like a direct short initially.
Andy
On Monday, April 13, 2020 at 1:08:16 PM UTC-7, kinsell wrote:
That could be a significant voltage drop across the resistors. I'd use
a couple power Schottky diodes instead.
|