On Saturday, May 2, 2020 at 6:49:16 PM UTC-7, wrote:
OK. Enough is enough. Tom, you ARE a liar. Below is the entire email string between us. You indicated the delivery time was unacceptable for the wing wheel, but you would send a check for the tow bar. I have no record in my bank statements from 2019 that indicate a payment from you, nor is there any evidence that I received one or refunded your money.

What this shows is that you NEVER paid for a wing wheel, and probably not the tow bar either. You are a bombastic, pontificating asshole, an opinion shared by several other pilots who know you and have responded to me privately.

If I ever decide to resume production of wing wheels and tow bars, rest assured that your requests will be denied.

Hi Mark,

I would like to order:

Tow out bar
Pair of wing cuffs
Wing wheel

These are for a ASH31Mi.

Need pricing for the lot plus shipping.

Thanks,

Tom

From: Tom S---
Sent: Tuesday, February 26, 2019 12:29 PM
To: Mark M
Subject: Tow out dolly

Hi Mark,

The delivery is ok for the tow-out bar, but not for the wing wheel. I will send you a check for $275. What is the price for a wing cuff?

Tom

From: Mark M
Sent: Tuesday, February 26, 2019 6:46 AM
To: Tom S---
Subject: Tow out dolly


Tom-


Price on the tow bar is $200. The optional tail lifter is $50. An ASH-31 wing wheel is $700. Shipping on both is $75.


I am out of stock on the tow bars, and wing wheels are each custom fabricated. Delivery is generally 4-6 weeks after receipt of payment, but I am involved in a really big project right now, so my time is limited. It might take a bit longer unless I can squeeze them in.


Best regards,

Mark M


On 2/25/2019 1:06 PM, Tom S--- wrote:
Hi Mark,

I just called you about a tow-out dolly for an ASH-31Mi. I also need a wing wheel. Please respond with price and delivery costs for both. My address is:

Tom S---

Thanks.

(Email and physical addresses deleted. Last names also deleted, but you can read between the lines.)

Your interpretation of "scrubbing" is based on your experience with the Cobra wing wheel, probably the flimsiest, mass produced, doesn't-fit-anything piece of junk I have seen. It can't be properly aligned with the direction of travel because it doesn't clamp to the wing securely and it flexes so much that the alignment changes when it is in motion. The cheap-ass foam rubber padding slips, dries out and then crumbles into dust.

When I bought my first glider in 2000, I used one a couple of times and immediately started work on a design that evolved into a product that had over 300 buyers, many of them repeat customers. Is it the best? Maybe not, but it evidently satisfied the needs of the customers. I am very glad that you were not one of them.

(And it's not physics, it's simple geometry.)

Mark,

OF COURSE you don't have a record in you bank statements, I told you to SHRED the check that I sent you after you told me you had NO IDEA how long delivery would be, if ever. Presumably you did that because the check was never cashed. A week after I told you that you called me back and told you had a break in your schedule and could do the job, but I was DONE with you by that time. Your memory of this is appalling, but mine is perfectly clear - you just don't fantasize sending a $1,200 check to someone. Here is the purchase order I enclosed WITH the check dated 3/6/19:

PURCHASE ORDER

To: MM Fabrication
PO Box 1623
Moriarty, NM 87053
Mark,
Per your previous quotes by email and telecon I am placing an order for the following items:
1 Single-place tow out bar $200
1 ASH31Mi wing wheel $700
2 ASH31Mi wing cuffs $250
1 Shipping $75
Total $1,225
Enclosed is a check for the total amount. Please contact me if the shipping costs exceed $75 and I will pay the difference. I will forward a tracing of the inner panel cross section as soon as available.
The shipping address is:
xxxx
xxxx
xxxx
xxxx
Thanks,
Tom

Scrubbing is a fact of life because of the geometries involved. The forces exerted on the wing wheel are the same, but the Cobra deals with it far worse than your wing wheel.