On Fri, 02 Apr 2004 01:52:36 GMT, wrote:

If the goal here is to set the mixture control linkage so that "proper"
mixture occurs with the control at the full lean position, then this had
better be done at or near sea level density altitude. How is the procedure
done on the ground in Denver?

I don't know. All the manual says is that an "allowance" should be made
for setting idle for weather conditions and field altitude. It doesn't
state how to compute that allowance.


Ron (EPM) (N5843Q, Mooney M20E) (CP, ASEL, ASES, IA)