Hello,

I just asked into factory about your problem!
I receive answer below. If you give me your fax number I can send you =
also fax with drawing.

Best regards,

Luka Znidarsic, www.ies.si LAK Sailplanes (dealer of LAK for Italy and =
Slovenia)



Dear Luka,

The spot where vent hole is located is at distance of 25mm from =
root rib and 226mm from wing leading edge, and (or) 394mm from flap =
mounting axis. To help you to understand where it is located I'm sending =
to you a fax.
CAUTION!!!: for finding hole, first of all, use small (about 1mm =
diameter drill) and drill about 2mm deep hole. And only if you find =
hole, only then use bigger drill.=20
Sincerely

Linas Bartkevicius=20
Manager=20
AB Sportine Aviacija=20
Pociunai LT-4340, Prienai=20
Lithuania=20
Tel.: +370 319 60567=20
Fax.: +370 319 60568=20
Mob.: +370 652 77282=20
http://www.lak.lt=20
E-mail: =20