Having done a little dope and fabric work
(since 1947) for a thrifty job on a Cub size
acft start out with 50 yds of 2.7 oz dacron
from Acft Spruce and use their uncertified tapes , 25 gals of Certified
Dope (Acft Spruce) . Thin this mess with wash lacquer thinner. Glue your
fabric on with a good quality contact cementYou'l need a couple of cans
of aluminum paste and a roll of dacron ribstitch cord. Is this safe?
well theirs a helluva lot of P51 rudders, a
slew of wild cats, bearcats, B25, Corsairs
a Beech Stagger wing. and yes the rudder off a real Jap Zero, some
French Stampes, and on and on . You should be able to recover a Cub size
acft (experimental) for about 1500 bucks through silver. After hearing
about the
high prices on Imron I checked our local
auto paint supplier and found that premixed colors industril Imron goes
for a little over 100
bucks a gallon and it includes reds and such colors as BFI blue, and
John Dear Green. Minot Piper 325 692 0538


























http://community.webtv.net/minotpiper/HELTONLARKWOODY