View Single Post
  #7  
Old October 20th 04, 03:40 AM
Eric Greenwell
external usenet poster
 
Posts: n/a
Default

Bill Daniels wrote:
OK, this is going to get good.

Eric thinks wide fast turns work best for him.


"Fast" is relative: at 8.2 lb/sq ft, going a slower is
counterproductive. I can slow down to 45 knots from the usual 50, but
the glider isn't very steady, feels "draggy", and it doesn't climb any
better, even in very smooth thermals (this measurement done when
circling with other gliders). In anything but very smooth thermals, the
50-52 knots is needed to have decent control, anyway.

I think 45 degree turns are
best on average with steeper turns useful in small cores. If fly as slow as
I can without risking a stall.


This may be appropriate for the Nimbus 2, but not for the ASH 26, where
the stall is noticeably lower than minimum sink. Waibel told me once
that he considers this a safety feature.


Lets have a poll. Tell us how you thermal.


And what, and where. These are likely important reasons for your bank
angle and speed preferences.


Bill Daniels



--
Change "netto" to "net" to email me directly

Eric Greenwell
Washington State
USA