Hi Brian

Although as another poster pointed out there have been other causes of
FAT errors in the past (lack of space on your PDA), however I suspect
you saw the same intermittent failures I did, especially if they just
cleared themselves up without you having to make more space on your
PDA. So while I definitely do not speak for Cambridge support I'd
suggest you do clear the log memory.

The workaround is to type the "clear log" command at the 302 command
prompt, and to do this again if you suspect you are getting close to
filling the log memory space - that should be a while. There is no way
to do this from within the standard Cambridge utility software (a good
idea given you don't want to do this accidently). To do this you need a
terminal emulator hooked up to the 302 serial port and literally type
"clear log" at the "cmd" prompt. Cambridge can supply you with a
terminal emulation utility for an iPAQ/Windows Mobile PDA. I would
expect other terminal emultors, including things like hyperterm on a
Windows PC should work fine. If you have problems I'm sure Gary at
Cambridge support can help or post back here.

Cheers


Darryl Ramm