TaxSrv wrote:

You mean to borrow his trained mouse, or his JB Weld to epoxy the
nut in place?

I'd put in rivnuts (as Jim suggested). There's entirely too much danger of
epoxying the bolt into the nut.

If you do go the epoxy route, buy a bunch of nylon bolts and use those to hold
the nuts in place while the epoxy cures. If any of the bolts gets glued in, they
can be removed with a drill and tap pretty easily.

George Patterson
Drink is the curse of the land. It makes you quarrel with your neighbor.
It makes you shoot at your landlord. And it makes you miss him.