Eric Greenwell wrote:
David Kinsell wrote:

The FSG 2T very specifically says don't try to transmit with less than
11 volts, so I think that would be an expensive option that really
wouldn't help out.

Contrary to what Dave writes, here is what the FSG 2T operation manual
says on page 50 of the FSG 2T Installation and Operation manual,
available on Wings&Wheels or Dittel's web site:


Utter baloney. The brochure for the radio, also available at the
W&W site, says:

"Is onboard supply sufficient? Observe onboard supply indicator
particularly during transmit, at least 11.0 Vdc must be shown!"


http://www.wingsandwheels.com/FSG2T%20Brouchure.pdf