Thread: Icing Airmets
View Single Post
  #1  
Old January 29th 04, 06:39 AM
Mike Rapoport
external usenet poster
 
Posts: n/a
Default


"Icebound" wrote in message
ble.rogers.com...
Mike Rapoport wrote:
"C J Campbell" wrote in message
...

"Dave" wrote in message
hlink.net...
| I'd like to know how you get in icing when the temperature is +5. I

have
| never seen ice until the the gauge reads 0 or below.

Icing occurs when liquid water freezes on an airplane surface that is


below

freezing. The aircraft may have been cooled earlier when it flew through

a
layer.


Almost. Icing occurs when a below freezing aircraft encounters

supercooled
water. Supercooled water does not exist above 0C.


True, but only partially correct.

Above-freezing water will still freeze and cling to your below-freezing
airframe. In fact, the preferred migration of liquid and of
not-condensed water vapour is "from warm to cold". So moisture will
migrate to the below-freezing airframe.... you can even get a thin sheet
of ice forming in absolutely clear air, simply from the condensation of
the water vapour. (similar to your glasses fogging when you come inside
from the cold)


Until such time as the airframe finally warms up to ambient and sheds
the ice.


Which will happen before any of the theorized freezing takes place at least
at the leading edges.

Mike
MU-2