Thread: Icing Airmets
View Single Post
  #2  
Old January 30th 04, 03:04 PM
Mike Rapoport
external usenet poster
 
Posts: n/a
Default

If you say so John but you never present any evidence or reference to back
up your assertions. Small droplets are not a major icing hazard because
they freeze right at the leading edge..

Mike
MU-2

"Tarver Engineering" wrote in message
...

"Mike Rapoport" wrote in message
ink.net...

"Bob Gardner" wrote in message
news:XKARb.132385$nt4.579289@attbi_s51...
Any time air is accelerated, as it is when passing over a small-radius
surface, its temperature drops...so it is entirely possible to accrete

ice
when the temp is above zero.
first...OAT guage, struts, lower edge of windscreen where there is a

lip
rather than a flush surface, etc. That is also why tail feathers begin

to
accrete ice before the wing's leading edge does.

Bob Gardner



While small radius objects do collect ice better than larger redius

objects,
temperature drop has nothing to do with it. Small radius objects have a
higher "collection efficiency" meaning more of the droplets in their

path
will impact the surface. They have a higher collection efficiency

because
they don't project a "bow wave" as far in front of them as larger. You

NEED
supercooled water for airframe icing.


Not exactly. Small objects and small water lead to the best conditions,
from a statistical standpoint, for gathering ice.