ICP uses CNC laser and punch presses to create many of the parts and holes.
I would guess only 10% of the holes need to be drilled by the assembler. In
my case, the plane was flying in 275 hours, and this was the reason I went
with ICP instead of Zenith. I'm retired and didn't want to spend the rest
of my life building the plane.

tom

"Jay Honeck" wrote in message
news:M7Gef.543273$x96.37269@attbi_s72...
Cool airplane. I am particularly impressed by the claim that the parts
are so dimensionally accurate that no fabrication is required!