RST Engineering wrote:
: OK, now take that old relay, get a piece of bond copy paper and some pure
: isopropyl (the 99% stuff) alcohol, tear/cut a strip of the bond paper about
: a quarter of an inch wide, soak the first two inches of the paper in the
: alcohol, and run the paper between EACH of the contacts of the old relay,
: holding pressure on the top and bottom contact just enough so that the paper
: doesn't tear.


I find old business cards are just the right thickness & strength to handle
this task. Since my old company changed area codes, then logos, I have enough
old business cards to last a few lifetimes.
--
Aaron C.