Quote:
|
Originally Posted by Greg Arnold
Birdbones wrote:
This winter I wired a small 8 ohm .5 watt speaker to my 302 and mounted
it near my ear. It works fine. The only problem is that the 302 does
not allow me to disconnect the internal speaker so it continues to be a
load, although at low volume it should be a small load. I believe that
I read that you should not wire both the B40 and the 302 to the same
speaker.
Randy Cone
The speaker that came with my 302 is rated 8 ohm and 3 to 5 watts. So
your speaker is rated at only about 10 to 15% of the wattage, yet can
handle the watts coming from the 302.
|
Greg if I may add a question to your thread: I have completed the same task as you this winter but would like to add a box that allows me to plug a Ipod into it to play over the speaker. But would like the sound to be cut when the radio receives. I have seen this box used in applications with headsets? Has anyone body found one or built one?
John "XLT"