GNS430 Without the IAF
Jerry wrote:
/snip/
Anybody got a better way?
- Jerry Kaidor
Jerry,
While I have never flown a 430, I have flown several other IFR GPS's
(Trimble/Free Flight, Appolo/UPSAT), and on them, my solution would be
roughly as follows: Activate the approach via the JEFNY IAF. Fly the
assigned heading, until the approach mode initializes, then scroll
forward in the flight plan to the JIKPE-AMEBY leg. Select Direct TO
Ameby, and the approach should sequence normally after that. You may
even be able to do this before approach mode initialization, I'm just
not sure about Garmin's programming.
Happy Flying!
Scott Skylane
|