Roy

I have a ventus b and mount the EDS unit below the canopy on the right
side with the controls facing me easily reachable with my hand. The
unit mounts with "dual lock" plastic velcro like stuff, comes with
the EDS. This also allows you to easily see the settings and turn off
and on. The 4mm OD poly line from your regulator to the unit is low
pressure 15 psi. I use RC Model rubber control rod guides to route the
hose fixed to the sides of the glider with a drop of superglue. The
cannula can be connect and place in the pouch.

I have found will all oxygens systems you should get the largest bottle
that can fit in you glider. If the bottle is hard to access, I would
recommend a flex fill. Both of these save filling hassels.

I have EDS oxygen systems on my website at competative prices. Please
see

http://www.craggyaero.com/edssystem1.htm

Richard
www.craggyaero.com






Roy Clark, B6 wrote:
Am planning to upgrade to an EDS unit.

Now have to think about where to mount the unit,
type and size of bottle, etc.

Any suggestions would be appreciated.

Thanks,