"Mark Hansen" wrote in message
...

Because from COUPS your to fly the bearing to the LOM. The notes on
the feeder route say: "1400 NoPT to LOM 015".


From COUPS you fly the SAC 195 radial inbound to the LOM. Check the enroute
chart. COUPS is on V6 which is defined by the SAC 195 radial.



Here's another problem with this procedu From COUPS, it says that
the LOM is 015 degrees. However, the VOR is 016 degrees. That puts
the LOM to the left of the VOR (when looking from COUPS). However,
it also says that the LOM is 018 degrees from the VOR. That puts it
to the right of the VOR (again, when looking from COUPS).

Is this a rounding error, or am I missing something?


016 is the localizer azimuth.