"Dave S" wrote in message
ink.net...
Kingfish wrote:
Jim Macklin wrote:
But I agree, jets require the

squat switch (unless there is a malfunction) to deploy
reverse.


I read recently the C-5 that crashed at Dover, DE had a #2 engine
reverser unstow right after takeoff. The crew attempted the approach
with full flaps instead of partial flaps per the POH and the sink rate
was too high to overcome.


It was an "unlock" indication which is one step before an "unstow". They
shut down the engine in question to prevent an aysmetric deployment.. I
THINK i saw that they had pulled the opposite side engine (#3) back to
idle for some reason (directional control presumably... but I would have
thought the rudder would have enough authority for that..)..

I heard the full flap thing too.. but my version has them retracting from
full to some partial setting, and that the airplane was flying below the
stall speed for that weight and flap setting, and then simple physics took
over.

Dave

The report also said that after securing the #2, they continued to
operate the #2 thrust lever instead of the #3 which was still operating.
Dead foot, Dead engine.

Al G.