Jim Vincent wrote:
"Ed Gaddy"
We painted our Comet trailer with Supercoat. It is
a paint for metal buildings. You find it a building
supply store. It is white, very reflective, and will
reduce heating inside the trailer. It is flexible,
sticks well, and will seal cracks and leaks. We applied
it with rollers and brushes. The only drawback is that
it comes in 5 a gallon bucket.

Ed,
Can you be more specific about brand and product name. I looked around and
found stuff for sealing driveways. TIA.



Jim: you may want to consider Martin Senour's super tough acrylic
paint and super tough acrylic primer. You can find a description at
http://www.martinsenour.com/common/p...heet.asp?id=30. I painted
a trailer using basic hand rollers and it has held up incredibly well
and has lowered the interior temperature significantly. I found out
about it through a local contractor's paint supply store. The guy who
owns the store knew exactly what I needed. He had me wash the aluminum
of my trailer with a 50/50 vinegar water solution to clean it and score
it a bit. I used 200 grit sandpaper on some really smooth portions of
the aluminum, but that was probably unnecessary. Then, I primed it and
applied three coats. Three coats weren't necessary, but I had left
over paint. Two gallowns of paint and one gallon of primer (tinted
bright white) was more than enough, and the total cost was under
$100.00. The only issue was that, unlike latex, you needed 6 hours
between coats. So, I did it over two days.

John Murphy