View Single Post
  #1  
Old September 19th 06, 07:46 AM posted to rec.aviation.homebuilt
RST Engineering
external usenet poster
 
Posts: 1,147
Default Marking sheetmetal

You are kidding, of course? You are marking a line 40 mils wide and
expecting a piece to come out to 20 mils or better accuracy?

Jim



"DonMorrisey" wrote in message
ups.com...

At the risk of beating this subject to death, use a sharpie, however a
Fine Point Sharpie is too thick. An Ultra-Fine Point Sharpie makes a
line approx 1 MM in width.

Don...