On Wed, 05 Jan 2005 02:59:56 GMT, "G. Sylvester"
wrote:


I'm 80% of the way through my IFR so I must be right. ;-)
From my understanding is that this is correct. Think about it
this way, if you were 30 miles out and you had the runway environment
in sight, a normal descent rate can be made and flight visibility was
met, can you descend below MEA/MDA? of course not. The MDA rule
is for after the FAF so you can land otherwise you can simply
choose your altitude at any point of the approach claiming all
3 items were met.

Although we've gotten a bit afield, in the OP's example he was considering
descent at a point within the final segment (i.e. between the FAF and the
MAP).



the other big thing people are missing is the approach is not only
to keep you safe but also the controller will expect you to be
along the published route. A controller can certainly vector a VFR or
IFR plane below you.....published minimum for one of the step downs is
say 3000 AGL giving enough clearance. If you are lower, something
bad could happen. This is similar to what happened to the actor (?)
a few weeks ago (If I recall correctly). In that case I believe
the actor misunderstood or incorrectly determined he was cleared
lower when he was not.


Clearly bad things can happen if you are below the charted altitude for a
segment of the approach. However, the controller will not vector an
aircraft below you once you have been cleared for the approach and are past
the IAF.


Ron (EPM) (N5843Q, Mooney M20E) (CP, ASEL, ASES, IA)