Thread: Sizing the CB needs... Homebuilt wiring too
View Single Post
  #2  
Old October 16th 06, 02:19 PM posted to rec.aviation.homebuilt,rec.aviation.owning
mikem
external usenet poster
  
Posts: 66
Default Sizing the CB needs... Homebuilt wiring too

Dave S wrote:
I am installing a used Narco AT-150A transponder and have only acquired
the pinout.. not an install manual.. .
What size CB is considered adequate for this type of transponder that
will allow enough current but still protect the wiring from a short?

3A or 5A.