View Single Post
  #2  
Old January 14th 07, 09:02 PM posted to rec.aviation.homebuilt
BobR
external usenet poster
 
Posts: 356
Default Not wanting to use control sticks

That is an interesting subject for debate and no doubt there will be as
many opinions as there are pilots. I have flown both and generally
found the stick to be more comfortable and natural than the yoke.
There is just something very intuitive about using the stick when
flying. It also removes the natural instinct to try and drive while on
the ground.

On the other hand, my wife doesn't care for having the stick in the
middle of the seat and many people will prefer the yoke because they
are more familiar with it. A yoke also makes it substantially easier
to install adjustable seats with ample forward / aft movement for
pilots or copilots of widely varying heights. You either need to be
able to adjust the rudder pedals or the seats. I compromised and went
for a center stick instead of the yoke which allowed me to put in
adjustable seats that have good forward / aft movement and raise up as
the move forward.

Everything though still seems to end up being a compromise and now I
will have to reach across my body with my left hand to reach the
radios. I really like the setup in the Cirrus and Lancair aircraft
with their wrist action controls. I have never flown one though to
know how well they work from a flying point of view.


Wayne Paul wrote:
Lou,

I don't want to start a "flame" war; however, what advantage does a yoke
have over a stick? I have flown both and prefer a stick.
(http://tinyurl.com/yc6pog) The only advantage a yoke has is that it doesn't
interfere with a woman's long skirt.

Wayne

HP-14 "6F"

http://www.soaridaho.com/



"Lou" wrote in message
ups.com...

Well, here I go again, thinking instead of doing.


My plane call for control sticks just like 99% of the homebuilts out


there. But I've been considering using a control yoke (maybe cessna


150


modified) instead. To get from the yoke controls to the push/pull


tubes in the wing I may have to use Bowden cables. I may be wrong on


the name, but basicly similar to bicycle brake cables.


Has anyone used these kind of cables successfuly?


Or has anyone incorporated a control yoke instead of control sticks?


Lou