Bob Salvo wrote:
I once had trouble with a small leak between lines on the Winter. I don't
know of a better substitute.

I suggest using silicone rubber lines on the panel side, connecting to a
barbed fitting on each line on the glider. The silicone lines remove
easily, even years later, and form a good seal. If you think you might
get the lines mixed up when reinstalling them, then the Winter connector
would likely be a better choice.

--
Eric Greenwell - Washington State, USA
* Change "netto" to "net" to email me directly
* "Transponders in Sailplanes" http://tinyurl.com/y739x4
* "A Guide to Self-launching Sailplane Operation" at www.motorglider.org