View Single Post
  #1  
Old March 5th 07, 05:41 AM posted to rec.aviation.piloting,rec.aviation.student
Mxsmanic
external usenet poster
 
Posts: 9,169
Default Various flying and training questions (small aircraft)

What aspects of slow-speed or minimum-speed flight should I practice?

I've managed to fly for indefinite periods at just above stall speed, straight
and level and in standard-rate turns, holding altitude steady. I've managed
to do this both with full flaps and no flaps, gear extended and retracted.
What things should I try at these low speeds? The aircraft (Baron 58, in this
case) seems very unstable at low speeds.

I've read that maintaining altitude via the VSI is a bad idea, and that it
leads to "chasing the VSI." I almost never look at the VSI unless I
absolutely need a specific rate of climb or descent. Usually I just watch the
altimeter instead; when it starts to move, I adjust to compensate. Is this a
good or bad idea when trying to hold altitude? What about for climbs and
descents? Apart from an ILS approach, why would I need to care about a
specific rate of descent, especially if I have visual indicators on the runway
telling me whether or not I'm on the glide path?

I've heard that being below the glide slope is a bad thing that examiners
don't like. But if you are far enough out, you're always below the glide
slope. At what distance from the airport (or in what configuration) am I
expected to stay on or above the glide slope? And does being above the glide
slope count strongly against me?

If I am flying by hand, how well should I be able to hold altitude in level
flight? I'm not talking about regulatory restrictions, I'm talking about how
well a decent pilot should be able to do this. Within 100 feet? Fifty feet?
Five feet? And I mean without trimming first. What about when making a turn?

How steeply should I be able to turn coordinated and without losing altitude?
I can do standard turns well enough, but how much steeper do I have to go?

--
Transpose mxsmanic and gmail to reach me by e-mail.