On 2007-05-22, mike regish wrote:

script for an area brief and when I hit the send button, I get connected,
but it comes up with a line that asks for my password or last name. I have
long forgotten my password, but it doesn't matter since nothing I enter
shows up on the screen.

If you are talking about the direct connect modem services, both DUAT
servers are working fine. I use both, but primarily the DTC. With DTC when
you type in your ID and password, the '*' symbol echoes your input. But with
the CSC duat, there is no echo whatsoever. Both, of course, are for
security.

I don't normally type in this stuff for I have everything run by scripts,
but just tried with a terminal program to report to you. Ocassionally, I use
the DTC on the internet, but that is a much slower process than the modem
connection.

Incidentally, both services are set up to require an ID and password, which
I'm sure you can easily obtain from their help line, probably emailed back
to you.

....Edwin
--
__________________________________________________ __________
"Once you have flown, you will walk the earth with your eyes
turned skyward, for there you have been, there you long to
return."-da Vinci http://bellsouthpwp2.net/e/d/edwinljohnson