thanks for M76-4 copy and everyone's advice. am going to order another seal
and do better.
"Cy Galley" wrote in message
news:FVzui.55189$Fc.32497@attbi_s21...
Continental which used the same type seal as the Lycoming and Franklin
recommends the split be at 11 or 1 o'clock.(case spilt is at 12. My
recommendation is to use "super glue" on the ends. Make sure the recess
is clean and dry. Use a sealer on the outside. I like Loctite 515 and
remember to replace the garter spring and grease the lip. Look at
Continental M76-4 for the complete Continental instructions.


Cy Galley - Chair,
AirVenture Emergency Aircraft Repair
A 46 Year Service Project of Chapter 75
EAA Safety Programs Editor - TC
EAA Sport Pilot
"Dick" wrote in message
news:c26ui.7629$dD3.905@trnddc07...
Having spent 4-1/2 hours removing and 1 hour replacing a leaking split
seal on the front of my flanged crankshaft C-85 , my first flight today
still shows leakage....

Never really doing those old Chevy two part split seals well, I guess I'm
still inept G.

I think I'll be able to better the aforementioned time durations but
would appreciate any hints at doing a better job this time.

Thanks, Dick