Thread
:
Excessive valve clearance cause low power?
View Single Post
#
6
September 26th 07, 01:34 AM posted to rec.aviation.owning
[email protected]
external usenet poster
Posts: 193
Excessive valve clearance cause low power?
wrote:
: How old are your sparkplugs? We've had a lot of trouble over the
: years with Champions, and used to buy the Auburns before Champion
: bought them up and shut them down. They were an excellent plug and
: almost always eroded to limits before the internal resistor failed.
: With Champs, we've had the internal resistor misfiring at 50 hours.
: One didn't work right out of the box. The Unison plugs are no better.
: A poorly-firing plug will cause a slight RPM drop. They need
: to be tested under pressure to see that they continue to fire up to at
: least 120 psi.
It's done the intermittent thing with new plugs, as well as freshly gapped and cleaned. Besides, if a plug wasn't
firing, the mag drop would show it (it doesn't... runs smoothly on each mag by itself).
Nice thought though. We've already done all the easy and normal stuff....
-Cory
--
************************************************** ***********************
* Cory Papenfuss, Ph.D., PPSEL-IA *
* Electrical Engineering *
* Virginia Polytechnic Institute and State University *
************************************************** ***********************
[email protected]
View Public Profile
View message headers
Find all posts by
[email protected]
Find all threads started by
[email protected]