On Mar 28, 5:44*pm, "Fred Blair"
wrote:
I know this is not a glider question, but it is for a gliderport.

Does anyone know of any pipe other than metal that can withstand 150 psi for
a paint booth application.

I need to run 300 ft. from the compressor to the booth.

Thanks,
Fred

I checked in the garage and found 1/2 inch schedule 40 PVC rated to
600 PSI at 73 deg F. That seemed high so I looked for some other
samples. I found 1/2 inch with 480 psi and 400 psi ratings.

Andy