both of these DIN connectors on the Becker loudspeaker junction box are for
Microphone inputs (for 2 seaters) and have leads for Audio output also. The
Mic inputs can be selected on the radio itself for dynamic (non-amplified)
microphones or amplified (standard) amplified dynamic, electret, or carbon
type) microphones on the 3201 via a jumper in the radio you can select
either or mic type but not both at once)
these connectors also have audio output and ground so you can use headphone
from either din connector, you just would have to make a Din connector on a
headphone to use this connector.
see diagrams and installation on my website "useful info" page
http://wingsandwheels.com/useful.htm
tim

"Bob 7U" wrote in message
...
Hi,
I have a Becker 3201, connected to a Becker Speaker box (1PL 042) that
has two DIN sockets. One is currently being use by the Mic and the
other I believe is for a headset.
Any ideas where I can get a lightweight headset with the DIN
connection?

Thanks,

Bob 7U