View Single Post
  #4  
Old April 1st 10, 05:52 AM posted to rec.aviation.soaring
Mike[_8_]
external usenet poster
 
Posts: 199
Default Sgs 1-35 Polars for SeeYou Mobile

On Mar 31, 9:50*pm, Randy wrote:
Mike,
I do not understand what to enter on the SeeYou Mobile
Polar setting page. There are six available boxes.
Name Sgs 1-35
Min Load - 6.38
Stall Speed - 43 mph
a -
b -
c -

I do not know what goes in a, b, c boxes.
Even when I look at the polars for my own
glider, I do not understand what the numbers
mean.


Randy,

I do not use See You mobile but the three entries should allow for
sink rate at speed- in metric. If there are entry windows for both
sink rate and speed, then...

a-Best L/D or L/D sink rate and the speed it happens or
36.8-1 L/D or sink of .7 m/s @ 92 kph


b-Two meter sink rate and speed it happens or
2 m/s @ 148 kph

c-one higher speed sink rate/speed setting, say 3 meter/sec.
3 m/s @ 176 kph

These numbers should be close and work ok as far as an accurate
polar.

Mike