Originally Posted by Dave Nadler

On Apr 23, 2:15*am, mkaiser
wrote:
Hi,

I have an ILEC SN10B and tried to connect it with a FLARM device. But
unfortunately, the SN10B always tells me, that it does not get a GPS
signal. Does anyone of you know how I have to cable both devices? In
the end I'd like to use all features of the ILEC, like uploading tasks
to flarm, etc., but first it would be great if I have a GPS signal.

I already have installed the latest firmware, 2.35.

Thanks for any advice,
Martin

--
mkaiser

Hi Martin - Many people are using ILEC SN10 v2.35
with FLARM. The FLARM connection is one of the
IGC "standard" connections, same as newer Volksloggers.
If your cable works with a Volkslogger, it should work
with FLARM.

Make *sure* you configure both FLARM and SN10
for communication at 19.2kb (19200) !

(Use the FLARM configuration tool or just edit
the FLARM configuration file on the uSD card...)

Hope that helps,
Best Regards, Dave

PS: Please post the problem you find to help others...