On 5/19/2011 7:04 AM, JJ Sinclair wrote:
My trailer closes and latches better, now that
I have replaced the sheared off aluminum corner rivets with 1/8" steel
rivets. BTW, I can see a slight forward bend in the right side of my
fiberglass top just outboard of the hinge plate.

My metal top Cobra trailer has had a forward bend on both sides for at
least 6 years, probably longer. I also just noticed the pivot holes for
the top are elongated fore and aft. I may add a bushing to them, which
would move the top back 1/8" or more, and make it easier to close.

--
Eric Greenwell - Washington State, USA (change ".netto" to ".us" to
email me)