Wear on the runway, UV degradation.


"Brian" wrote in message
...
I have been a bit concerned with the ropes some places use.

http://www.engineeringtoolbox.com/po...th-d_1516.html
shows the following minimum breaking strength

1/4 1125 lbf 80%= 900 lb minimum glider weight
5/16 1710 lbf 80%= 1368 lb minimum glider weight
3/8 2430 lbf 80%= 1944 lb minimum glider weight

I prefer towing behind 1/4" rope I have seen a few rope breaks with
1/4" all seemed warranted with a rope in good condition.
It seem to me that unless you are towing a fully loaded ASG29 or a two
place that 1/4 rope is probably what should be used unless of course a
weak link is used. And even then 1/4" rope should be adequate at the
200% rating or less.
Am I missing something?

Brian