View Single Post
  #3  
Old June 9th 12, 02:12 PM posted to rec.aviation.soaring
Matt McKrell
external usenet poster
 
Posts: 7
Default Flarm Audio and Towplanes

On Jun 9, 7:13*am, GC wrote:
On 9/06/2012 08:49, Bob Gibbons wrote:

Just to clarify, the replies on how to integrate the PowerFlarm's
portable audio port into a headset are interesting.


However, what I really wanted to know is the operating experience of
non-US towplane operators using the classic PowerFlarm (which does not
have audio).


Has this proven to be a serious deficiency, or have your tow pilots
managed to manage with the purely visual threat warnings from the
display itself?


OzFlarms destined for tugs were modded by Nigel with an audio output to
be wired into the headset.

Without that the normal audio is useless in a tug.

GC









Bob


On Thu, 07 Jun 2012 20:07:33 -0500, Bob
wrote:


Question: How have Flarm users around the world handled the lack of
audio intercom output in the standard Flarm unit when installed in
towplanes?


Is the simple visual LED output on the Flarm display adequate, or have
you had to add auxiliary audio intercom capability to the Flarm for
your towplanes?


As we in the U.S. prepare to deploy PowerFlarm into our fleet, we will
have to deal with this installation issue into our towplanes.


In an unfortunate decision (my opinion), Flarm has opted to delete
from the "brick" model the intercom audio output that is part of the
"portable".


We are faced with the decision to either use the brick in our
towplanes with no audio alert, or integrate the portable model, having
to add external displays and antenna to this otherwise self-contained
unit.


What have others found regarding the need for an auxiliary headset
audio output when towing with the Flarm?


Thanks


Bob


The only connection to the display units is the 6 pin RJ45 cable from
the FLARM unit.
There aren't any lines available for audio. The Butterfly display
manual refers to an
internal audio unit. The mounting for the rectangular display only
lists a single small square
hole for the RJ45. It really looks like a dead end without a physical
redesign of
the unit. The only way to get separate audio output is to install the
portable.

-- Matt