Thread: hall of shame?
View Single Post
  #3  
Old June 29th 12, 01:24 PM posted to rec.aviation.soaring
Tony[_5_]
external usenet poster
 
Posts: 1,965
Default hall of shame?

On Thursday, June 28, 2012 11:56:50 PM UTC-5, bumper wrote:
On Thursday, June 28, 2012 7:47:51 PM UTC-7, Tony wrote:
My rental PowerFLARM for the 13.5 meter regional showed up early so I re-built the shelf that I used last year at Region 10. Thoughts? https://picasaweb.google.com/lh/phot...t=d irectlink

Will probably mount the dipole on the inside of the turtledeck area. I'm assuming that the signal will travel through wood with no issues?


Wood will attentuate the signal to a degree depending on moisture content and other variables. From the picture, it looks like the panel will block the signal from forward and much of the right front quadrant. Ideally, the portable with it's antennas should be mounted tob center of the glareshield if there's room. Failing that, aft of the glareshield with antennas still in the clear, vertical, and with nothing blocking them to either side and forward. They should not contact the Plexi.

bumper


no glare shield so the only way to do that would be to cut a hole in the nose and mount the powerflarm outside in front of the canopy. I could fair it in actually and it might look pretty cool...but yea, the current location keeps the antennas from touching the canopy when it is closed.