On Tuesday, April 30, 2013 3:47:47 AM UTC-7, wrote:
Using three batteries, I have three "-" battery wires running to a negative terminal strip all "jumped on the terminal input side. Is it also best to ground the "-" terminal strip to the largest metal mass in the glider such as the elevator/aileron yoke?



Thanks.



Ben

If you use crimp-on terminals, get a good crimping tool that holds the outside radius constant while forcing a prong into the crimp and rolls the split into the joint forcing it against the outside radius with the wire in between. Don't use the cheep Wall-Mart crimpers that just smash top and bottom together.
JJ