Am Donnerstag, 16. Mai 2013 05:43:05 UTC+2 schrieb Matt Herron Jr.:
Last weekend I flew with the PF core upgraded to 3.00 and an Oudie upgraded to 4.40.004. A V7 connects the two together (Firmware 2.02). All the flight stuff worked fine, but I still got the error -9 when attempting to download the flight from the core via the Oudie ConnectMe program.

Matt,

I don't know Oudie very well, but PowerFLARM does not support flight download via
the RS232 connection. We might add that at a laster stage, but it's *not*
on our top priority list right now. USB download is faster and modern displays
will allow you to initiate a download after the flight without power cycling
PowerFLARM (BF 3.1 display). The Oudie folks might want to implement that as well *hint hint*.

Progress indication is also implemented in newer display versions, so the
PowerFLARM Core LED becomes less important.

If you have no access to the USB slot, I'd suggest an extension cable.

Hope you guys are getting some good lift!

Best
--Gerhard (FLARM dev mgr)