Thread
:
X-43A successful flight
View Single Post
#
107
April 7th 04, 03:22 AM
Doug \Woody\ and Erin Beal
external usenet poster
Posts: n/a
On 4/6/04 8:11 PM, in article
, "Tarver
Engineering" wrote:
"Mike Kanze" wrote in message
...
Let us agree that I know where the F/A-18 stick breaks out at (20#) and
that you and monkey are clueless.
Well, THAT was an insult. Nice work.
Once again, the Tarverbot shows his OWN cluelessness.
Not me. It is unsafe for the operator to not know that the stick breaks out
to activate the mechanical backup. There is no guarantee the failure of the
electric controls will cause the force transducer to deactivate. Once agian
a pilot is so ignorant as to believe they know more about how an airplane
works than a systems engineer for that airplane.
This is NOT a safety of flight issue, and you couldn't possibly be a systems
engineer for the Hornet.
There is no difference in stick forces or "break out" as you're calling it
between CAS, DEL, or MECH modes. Perhaps you're talking about the feedback
force that is added when the stick is displaced from its neutral position?
That is certainly not a "break out."
How many F-18 hours a year in the air are you and monkey getting Woody? 50?
20?
Per year? Absolutely ZERO in MECH, more than 150 or so in CAS, less than 1
in DEL (spin recovery mode).
Look, Tarver, I've accumulated enough hours in the Hornet to have more than
a clue about its systems and how to employ them than you do.
--Woody
Doug \Woody\ and Erin Beal