On Thursday, July 24, 2014 10:52:30 PM UTC-7, Doug Mueller wrote:
Richard it is a Dittel. The problem only started when installing

the Oudie 2 to the ships power. Doug













At 00:05 24 July 2014, Richard wrote:

On Monday, July 21, 2014 11:36:41 AM UTC-7, Doug Mueller

wrote:

At 12:19 21 July 2014, jherzog wrote:







I have an Oudie 2 coupled to 12V power and exchanging

data



with an LxNav



Nano using the cable kit that comes with the Oudie. I



experienced



significant radio noise -- usually enough to break the

squelch. I



saw a



prior posting by John DeRosa, who recommended this



inexpensive yet



overpriced ferrite choke core from Radio Shack:



http://www.radioshack.com/product/index.jsp?



productId=2103222







I installed it around the Oudie power/data cable, about 1/2

inch



from



the Oudie-side of the cable -- I have had no radio issues

since.



















--



jherzog







Thank you to all for replying. I will try this solution first and

report



back. Doug



Doug,



What brand of radio?



Richard

www.craggyaero.com



I believe it has an auto squelch

Depending on the age of the transceiver it has a squelch threshold pot (it is very sensitive) either internally or for later models in the setup software that has to be adjusted upwards.

The Becker is similar for the Becker you need to look at the installation manual for instructions. Not the operating manual.

Richard
www.craggyaero.com