On Tuesday, November 18, 2014 8:59:18 AM UTC-5, Sean Fidler wrote:
I have a PowerFlarm Brick which connects to the SN10, then the SN10 sends NMEA to the Oudie. This all works very nicely but I don't like the way the Oudie displays close in Flarm warnings (essentially it doesn't). I simply see the Flarm targets on the map view. The Oudie does not jump to a Flarm collision screen when a warning is announced. I prefer the simple warning interface of the Flarm displays (balls at the "o'clocks"). Perhaps I have the Oudie set up incorrectly? Maybe I can get Dave Nadler to add a Flarm warning page to the SN10 ;-)? The FlarmView works well (ball at o'clocks warning view) although I would personally prefer to have a display that is neatly and cleanly installed in the open 57mm slot. Perhaps you have a good point on the right placement being on the top of the panel. That would also give me room for something else. It would be easy to place an L bracket on the top of the panel to mount it. Thanks.

I like ClearNav's "traffic 2 o'clock high" audio output. No look down at alarm, interpret, then look. Just listen and look. You aren't looking down to figure it out just when you need to find the target.
I don't know how many other have this, but to me, this is the way it should work.
FWIW
UH