Thanks. I remember (now) that Oudie has an audible flarm warning "announcement" but I also remember that I found it hard to understand. The speaker on the Oudie was not the best. At least on my Oudie. Depending on the situation, the cockpit can be very loud with the vario chirping away, wind noise, radio activity, etc. Maybe I need a hearing check.
I know that Oudie does provide good basic FLARM data on the map section of each screen (FLARM RADAR). This works quite well. However, when a collison warning occurs, I believe the banner on the screen shows some useless text like "Warning - traffic 2 O'clock, above" and a spoken warning occurs (that I find hard to understand) if you have the warning turned on. If I remember correctly, the Oudie display itself does not present the directional warning screen like a tradition Flarm does. That is what I really want (see pic below). Audio is only good for me if I can comfortably and very reliably hear it.
pic of screen -
http://www.cumulus-soaring.com/flarm...ningScreen.jpg
This is why I bought the FlarmView in the first place (for the directional warning screen).
I just looked at the Oudie manual (
http://download.naviter.com/oudie/Oudie.pdf). Here is what I found:
3.9 Flarm Radar
...."SeeYou Mobile is able to read the output from Flarm devices and present a radar-like system which displays other Flarms with correct visibility/privacy settings in vicinity. Flarms that have privacy enabled are hidden."
8.9 Warnings
There is three types of warnings in SeeYou Mobile
1. Airspace warnings 2. Altitude warnings 3. Flarm warnings...
....Flarm warning is special in that it "reads" the information from the Flarm device and then uses voice
Thats it. Nothing is stated and no diagram showing what/if the actual Oudie flarm collision warning screen looks like.

Do you think there is a visual directional warning screen that shows the direction and altitude of the threat on the Oudie display when a warning occurs? If not, I think the boys and girls at Naviteer should consider adding it!